E-flite 10-Amp Pro BEC Brushless ESC (JST)

10-amp Pro brushless ESC with advanced programming and BEC.

• Programmable throttle input range (1.1ms–1.9ms or Auto Select)
• Soft start
• Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
• Programmable motor braking
• Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
• Up to 10-amp continuous current with proper air flow
• Auto motor shutdown if signal is lost or there is interference
• Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
• Safe power-arm mode prevents accidental starts

Specifications:

Brakes: Yes – Programmable

Amperage: 20 & Under

Programmable: Yes

Maximum Burst Current: 12A (15 sec)

Connector Type: JST

Output Connector: 20AWG with 2mm female gold bullet connectors

Part Type: Electronics